Project

7
`
H ole Layout
3.1 – Hole Layout
O n th e face of th e top layout th e center line
of th e circle. 9 ” from th e top and 12” from th e edge.
3.2 – Draw 6” Circle
U se a compass to mark th e circle using th e
centerline as reference. W e set th e compass at 3” to
create a 6” diameter circle.
3.3 – Cutting
Cut th e h ole with a j igsaw. Drill a ½ ” diameter
h ole to start th e j igsaw cut.
S tep 3 A ssem b le B od y
Draw 6 ” C irc le
C utting
Step 3: Assemble Body
3.1 – Hole Layout
On the face of the top, layout the center line of the circle.
9” from the top and 12” from the edge.
3.2 – Draw 6” Circle
Use a compass to mark the circle using the centerline as
reference. Set the compass at 3” to create a 6” diameter
circle.
3.3 – Cutting
Cut the hole with a jigsaw. Drill a ½” diameter hole to
start the jigsaw cut.
Hole Layout
Cutting
Draw 6” Circle
12
9