Project

6
Step 2: Assemble Body
2.1 – Glue Frame to Board Top
Using the frame as a guide, mark the location of the
frame on the back of the top and apply PVC cement to
the marked area.
2.2 – Attach Frame
Secure frame using 1” Kreg Pocket Hole All weather
screws (course thread) .Utilize the gauge block for
spacing and clamping the frame to the top.
2.3 – Install Interior Supports
Use the same technique (PVC cement and Screws) to
fasten interior supports.
NOTE: cut a spacer block to hold the position of the
framing during installation.
Glue Frame to Top
Install the Interior Supports
Attach Frame with Screws
Attach Frame with Screws
Install the Interior Supports