User manual

Making Audio Discs
Making an Audio CD
83
Working With Tracks
You can move tracks across multiple discs, adjust pauses between tracks,
as well as preview, rearrange, remove, and rename tracks in the Content
Area.
To span an Audio CD project across multiple CDs:
An audio CD can contain up to 99 tracks. Up to 80 minutes of audio can be
recorded on a standard 700MB CD-R. While you can’t exceed that amount
of audio, you can arrange tracks so that they’re burned onto multiple CDs.
1 Add audio files to the Content area until you have exceeded the 80
minute per disc limitation.
2 Toast automatically adds a separator which breaks your list of audio
tracks into two discs. The separator for the second disc is labelled Disc
2.
3 Once you have added all of the audio tracks to your project, you can
drag files up and down not only within a specific disc, but from one
disc to another.
If dragging an audio track pushes a disc beyond the 80-minute limit,
tracks exceeding the limitation will be moved to the next disc.
4 You can manually add a track separator by selecting an audio track
and clicking the Add Disc button at the bottom of the window beside
the Info button. The new track separator appears below the selected
track in the Content Area.
5 To delete a disc separator, click on the X located at the right side of it.
You can not delete disc separators that would cause more than 80
minutes of audio to appear on each disc. To remove those separators,
you must first remove audio files from your project.
To adjust pauses between tracks:
1 Select the tracks for which you want to change the pause duration.
2 Click the Pause column.
Choose the pause that you want from the drop-down menu. You can
set individual pauses from 0 to 8 seconds, but the pause before the
first track must be two seconds.