User manual

Making Data Discs

Burning Projects to Multiple Recorders

Toast now includes support for burning most projects to multiple CD, DVD,

or Blu-ray recorders at the same time. The steps here apply to all disc

projects where Multiple Recorder Support is available, including Data,

Audio, Video, and Copy projects.

To burn projects to multiple recorders:

1 Once you have prepared your project and are ready to begin burning,

select the Destination pop-up menu at the bottom of the screen and

choose Select Multiple Recorders.

2 Click the red Burn button.

3 The Multiple Recorder Setup window appears. For each recorder you

would like to use to burn your project:

a Click the checkbox to the left of the drive name so a check mark

is visible.

b Place the appropriate type of disc (CD, DVD, or Blu-ray Disc) into

the drive. You can use the Eject button on this screen to open

each drive tray.

c Confirm that the status for each drive shows a blank disc is

inserted.

Note: You must use the same type of disc in each drive. You

can not burn to a CD in one drive and a DVD in another drive,

even if the project would fit on both the CD and DVD discs. We

recommend that you use the same brand and model of disc in

each drive.

4 Optional: Select the Write Speed you would like to use for recording

your project to each drive. You can only select speeds that are

common between the selected drives.

5 Click the red Burn button to begin recording your project.