5

71
Making Data Discs Using DirectCD
5 From the Destination Folder list, select the folder where you
want to copy the files.
If you want to create a new folder, click New Folder and
type a name for the folder.
6 Click Copy.
ScanDisc copies the selected files to the location you selected
and the File Copy Progress dialog box appears.
If ScanDisc finds damaged files, it lists the file names.
7 Click Done. The File Recovery dialog box appears.
8 Repeat Steps 2–7 as many times as needed to copy all of the
files you need from the CD.
9 From the File Recovery dialog box, click Done to proceed to
the repair process.
Recovering Lost Files
If ScanDisc finds lost files during the recovery process, it asks if you
want to recover the files.
We strongly recommend that you recover all files that may have data
you need. If you do not, the files may not be accessible after Scan-
Disc repairs the CD later in the process.
To recover lost files:
1 Click Yes when ScanDisc tells you that it has found files that
have no file name. The Select a Destination dialog box appears.
2 From the Destination Drive drop-down list box, select where
you want to copy the files.
You can select any drive on your computer except the
CD-Recorder you are recovering the files from. If you want to
copy the files to another computer on your network, you must
map the drive first. Refer to your operating system’s
documentation about mapping drives.
3 From the Destination Folder list, select the folder where you
want to copy the files.