Operation Manual

30/40

Fig. 4: Correct positioning of the radiating element

Mounting on the wall

1. Take out the accessories kit for the wall mounting (included in the scope of supply).

2. Mark the 4 holes of the fastening brackets (2 each per bracket) on the wall. Observe

the spacings in the drawing drawing for this (see Fig. 5)

3. Drill the holes (drill: Ø 8 mm) in the wall and fasten the brackets with the enclosed

screws and dowels.

Fig. 5: Correct positioning of the radiating element

min. 100 cm

min. 70 cm

min. 100 cm

min. 180 cm

Boden

Dec

Raumhöhe: 2,40 m

min. 120 cm

35 mm