Manual
GB
the appliance starts up
.
04:00
P 1
21
°
C
4
PROG
0 3 6 9 12 1815 21 24
a. Press the button to select
the heating program to be changed
with “+” and “-”.
b. Keep the button pressed
for 3 seconds until the time in
the display 00:00 (Fig. 5c, No. 1)
flashes and PROG (Fig. 5C, No. 9) is
displayed.
c. You can now select the mode
for 00:00 hours. Press the
button for this until you reach the
desired mode (Comfort, Eco, Frost
protection mode). “--” means the
appliance remains switched off.
d. You can also set the desired
temperature with “+” and “-”. (The
temperature in Frost Protection
mode cannot be changed.)
e. Next press the button again,
the time changes to 01:00 hours.
You can select the desired mode
again with . Continue until you
have selected the desired mode for
each time.
a. Press the button and select
the “AU” program with “+” or “-”.
b. Keep the P/PRO button pressed for
3 seconds until “PROG” appears in
the display.
c. Select the desired day with the
“C/M” button.
d. Select the desired program with “+”
or “-”.
e. Wait a few seconds until the
programming is saved. Then repeat
the steps to assign the other days
also.