Use and Care Manual

20 21
1.6 Auto-o
The steam generator is
tted with an «AUTO-
OFF» monitoring
system, which is
activated automatically
after approximately 8
minutes without use. The
«ON-OFF» button ashes
to indicate that the
appliance is on standby.
To reactivate the steam
generator, press the
«ON-OFF» button.
After approximately 30
minutes of non-use, the
«AUTO-OFF» system
switches o your steam
generator.
To start your ironing
again, press the
«ON-OFF» button.
8
min
ON
OFF
ON
USING YOUR APPLIANCE
30
min
Move the unit over a sink
and ll the water tank.
Set down the stand near
the sink and place the
iron on top.*
Put back the water tank
in the base.
Plug in the unit and
switch it on by pressing
the «On» button.
MAINTENANCE AND STORAGE
ON
2.1 Descaling your
generator
The ashing «Anti calc»
indicator light indicates
that descaling is
necessary.
Switch o the unit
by pressing the «O»
button, then unplug the
unit.