User Guide

7
IRONING FUNCTION
The soleplate of the Steam 'n Press will smooth out tough wrinkles
from clothes and press in sharp creases and pleats.
Starting up
Before plugging in, please remove cover.
When the Steam 'n Press is plugged in the soleplate heats.
Do not touch or remove the soleplate cover without letting
the appliance cool down.
M
Remove the soleplate cover as indicated in the instructions section
“Removing the Soleplate Cover“.
M
Plug in the appliance, place it on its side
and wait approximately one minute for it
to reach full temperature before using.
M
During use or while unit is heating or
cooling, do not rest it on its soleplate.
Place product on its side on a firm, flat,
heat-resistant surface, as it will be hot.
Never iron clothes while they are
being worn.
Selecting the temperature
M
Set the thermostat control dial (A) according to the type of fabric
you are ironing. Check the fabric label for the appropriate setting.
Fabric Temperature
regulator
synthetics
nylon
●
polyester (low temperature)
silk
●●
wool (medium temperature)
cotton
●●●
linen (high temperature)
Start at low temperature
● and graduate to
high temperature
● ● ●. For delicate fabrics
we recommend carrying out a test on an
unobtrusive part of the garment (inner
seam). Steam can only be produced when
the thermostat is aligned to
● ● ● setting.
!
!
m
i
n