User Manual

• Remove the lint pad from the steam brush by

grasping on both sides and pulling downwards.

The lint pad should slide right off of the brush,

and clamp back on after use.

• For storage, attach the lint pad to the steam

brush by lining up the slots of the brush with the

slots of the lint pad. Gently push the top of the

lint pad into place until it snaps in.

Warning: never forget to unplug your device and empty the tank after

your working session. While not in use, you can hang you steambrush

by its hook.

"Click""Click"

After use

• Unplug the appliance. Empty the water remaining in the tank and leave

unit on its side to cool. After the appliance has cooled down, it may be

stored in the bag provided (depending on model).