User Manual

Steam setting
Set the brush steam output to the type of fabric to be ironed - see table
below.
Type of fabric
Setting
steam
Cotton / Linen
Silk / Wool
Synthetics
max.
min.
During use or while unit is heating or cooling, do not rest appliance
on its head. Place product on its side on a firm, heat resistant, flat
surface, as the head will be hot. As the appliance heats, the housing
becomes warm. This is normal.
5
Be sure to remove lint pad when steaming as
excessive water or steam can cause lint pad
color to run.
• To begin steaming, press the steam button with
the steamer head facing away from you, in
vertical position.
Tips: Check the fabric’s label for recommendations. We
recommend that you test acrylic, nylon or other synthetic fabrics
in an inconspicuous area to ensure these fabrics are not damaged
by hot steam.Test fabric for color fastness in an unobtrusive part
of the garment (inner seam). Do not touch silk or velvet with
steam head. Some articles can be steamed better from
inside.Heavier fabrics may require repeated steaming. Exercise
caution at all times. For very delicate fabrics, you can remove the
brush. To avoid damage to clothes, keep a distance of 1,5 inches
between the steam head and the fabrics. We recommend that
before the first use or after the appliance has been stored for
some time to test the burst of steam.