Use and Care Manual

Instructions
1. Place stove on a level, stable surface.
2. Attach propane hose to the brass stove inlet fitting.
3. Make sure propane bulk tank valve is closed.
4. Attach propane hose to outlet of propane tank.
5. Slowly open propane tank valve and check for leaks by applying small
amount of liquid soap and looking for bubbles to appear.
PREPARATION：
1. Read instruction before lighting.
2. When you are sure there are no leaks, turn cylinder valve and regulator control valve on hose to the closed
position.
3. Have a fireplace match or long-nosed lighter lit and over the burner from SIDE. Keep hands and face away
from burner.
4. Slowly open gas supply until burner ignites, keeping hands and face away from burner.
5. Adjust the regulator control valve for desired flame height.
6. When finished using the cooker, turn off gas cylinder valve first. lt will take a few secondfor the fire to go out
and for the propane gas to bleed from the hose and regulator assembly. After the fire is completely out, turn
regulator control valve to the OFF position.
7. To re-light, repeat steps 1-6. Always use CAUTION as cooker will be hot.
8. If ignition does not occur in 5 seconds, turn the burner control(s) off, wait 5 minutes, and repeat the lighting
procedure.
LIGHTING INSTRUCTIONS
CAUTION
DO NOT attempt to connect your camp stove to a natural gas supply. Use only
with propane, hose and regulator supplied with the stove and an approved bulk propane tank.
STORAGE
1. DO NOT leave propane tank attached to stove during storage or transport.
2. Wipe the burners, steel cooking grate, and propane hose before storing.
3. It is suggested to store stove and hose in a nylon storage bag to keep it clean.
Instructions
The warranty period of the product is 365 days from the date of purchase. If the product has any problem,
please feel free to reach out to us and we will work out solutions for you ASAP. And please include the
order number in the email when you contact us so that we can get the order and product info and help
you resolve the issue faster.
If you have any questions, please contact us at [e-mail]