User`s guide

RN-WIFLYCR-UG
www.rovingnetworks.com Version 1.2r 4/30/13 page 65
3.7.1.1 FIRMWARE VERSION 2.36 & HIGHER
Firmware version 2.36 and 2.45 support a comma-delimited scan output format, which
a microprocessor can use to parse the RSSI information. The scan command output
format is:
Where:
Figure 3-10 shows an example of the output format:
FIGURE 3-10: SCAN OUTPUT FORMAT FIRMWARE VERSION 2.36 & 2.45
Tabl e 3-12 shows the security modes.
Index Channel RSSI Security
Mode
Capabilities WPA Configuration WPS Mode MAC Address SSID
Field Value
Index 2 character, decimal
Channel 2 character, decimal
RSSI 2 character, decimal (negative number)
Security mode 2 bytes (see Ta bl e 3- 12)
Capabilities Bit-mapped 4 hex bytes (see Ta bl e 3 -1 3)
WPA Configuration Bit-mapped 2 hex bytes (see Tab le 3-1 4)
WPS Mode Bit-mapped 2 hex bytes (see Tab le 3-1 2)
MAC address Address
SSID Up to 32 chars
Note: The string END is added at the end of the scan data.
SCAN:Found 3
01,01,-59,04,1104,28,c0,20:4e:7f:08:df:85,dad-rules
02,03,-64,02,1104,28,00,00:30:bd:9b:49:22,basement
03,10,-71,04,3100,28,00,90:27:e4:5d:fc:a7,URSOMONEY
END:
TABLE 3-12: SECURITY MODES
Number Description
0OPEN
1 WEP (64 or 128)
2WPA1
3 MIXED
4WPA2
5 Enterprise WEP
6 Enterprise WPA1
7 Enterprise WPA mixed
8 Enterprise WPA2
9 Enterprise NO security