User`s guide

RN-WIFLYCR-UG
www.rovingnetworks.com Version 1.2r 4/30/13 page 54
FIGURE 3-5: TERMINAL TAB
3.2.4.2 MODULE CONFIGURATION TAB
Click the Module Configuration tab (see Figure 3-6). In this tab you configure the
WiFly module’s frequently used parameters such as device ID, UART baud rate, and
flow control. You configure other parameters with ASCII commands in the Terminal
tab.
FIGURE 3-6: MODULE CONFIGURATION TAB
3.2.5 Web Server Timers
The application includes two timers to ensure that the web server runs smoothly:
•Idle timer
• Browser disconnect timer