User`s guide

RN-WIFLYCR-UG
www.rovingnetworks.com Version 1.2r 4/30/13 page 53
FIGURE 3-4: NETWORK CONFIGURATION TAB
b) Type your AP’s security passphrase in the Passphrase box.
c) (Optional) The module uses DHCP by default. If you want to assign the mod-
ule a static IP, turn off the Check to enable DHCP option and enter the static
IP, subnet mask, and gateway.
d) Once you have configured the network settings, click Save Configuration
to save the settings to the module.
5. Exit the web server by clicking Exit Web Configuration App. The module
reboots in infrastructure mode and joins your wireless network
3.2.4 Using the Advanced Tabs
Turning on the Display Advanced Tabs option (bottom right corner of the application
window) show the Terminal and Module Configuration tabs.
3.2.4.1 TERMINAL TAB
Click the Terminal tab (see Figure 3-5). In this tab you can issue ASCII commands to
configure any of the WiFly module’s parameters. The web server includes a help utility
to guide you through the module configuration. To use this feature, type help in the ter-
minal.
Note: If your wireless network is hidden (i.e., not broadcasting an SSID), it does
not display in the scan output. In this case, you must manually enter the
SSID.