User`s guide

RN-WIFLYCR-UG
www.rovingnetworks.com Version 1.2r 4/30/13 page 44
2.7.5 boot image <value>
This command makes a file represented by <value> the new boot image.
Example: boot image 55 // Set the new boot image to a file
// represented by filename 55
2.7.6 ftp update <string>
This command deletes the backup image file, retrieves a new image file, and updates
the boot pointer to the new image, where <string> is the new image file to retrieve.
Refer to “Upgrading Firmware Via FTP” on page 83 for more information.
Example: ftp update wifly3-400.img // Retrieve the version 4.0 firmware
// (RN131)
Note: After changing the boot pointer to the new image, you must reboot the mod-
ule to boot up with the new image. After the module boots up with new
image, you must perform a factory reset on the module to initialize all the
parameters to the factory default settings. Then you can reinitialize the
parameters as required.