User`s guide

RN-WIFLYCR-UG
www.rovingnetworks.com Version 1.2r 4/30/13 page 39
2.5.8 show stats
This command displays the current statistics, packet RX/TX counters, etc. The com-
mand returns the statistics shown in Tab l e 2- 1 6 .
Example: show stats // Show the statistics
2.5.9 show time
This command displays the number of seconds since the module was last powered up
or rebooted.
Example: show time // Show seconds since last power up
TABLE 2-16: DISPLAY STATISTICS
Statistic Description
Conns The number of TCP connections.
WRX Number of bytes received by the module over TCP.
WTX Number of bytes transmitted by the module over TCP.
RTRY Total number of TCP retries.
RTRYfail Total number of TCP retries failed.
URX Total number of bytes received over the UART.
UTX Total number of bytes transmitted over the UART.
RXdrop Total number of bytes dropped by the UART.
RXerror Total number of UART bytes received in error (parity, framing).
FlwSet Total number of set software flow controls.
FlwClr Total number of cleared software flow controls.
Netbuffs Total number of dropped TCP packets.
Evt Total number of unknown events.
Adhoc_lost Total number of ad hoc disconnects.
Boots Total number of module restarts.
Wdog Total number of watchdogs.
TXon Unused.