User`s guide

RN-WIFLYCR-UG
www.rovingnetworks.com Version 1.2r 4/30/13 page 113
and WPAv2 with TKIP encryption.
• Added support for WEP shared mode
• Increased FTP filename size to 64 bytes
• Added a new reboot register in ad hoc parameters. This register is reserved for
future development and should not be used. Please leave it to default values.
• Added a new debug register in the system parameters. This register is reserved
for future development and should not be used. Please leave it to default values.
F.5 VERSION 2.27 09/08/11
• Added support for Wi-Fi Protected Setup (WPS) push button mode
• Added support for WEP64 encryption
• Added support for backup IP address
• Added a new TCPMODE register to control TCP connect timers, force DNS and
remote configuration
• Added new bit in UART mode register (bit 5) in which replaces the <2.23>\r\n in
console with the replace character
• Fixed the FTP file “put” mode so it over rides HTTP mode. In version 2.23 if HTTP
protocol is set and/or option format is set, extra data would be added to FTP put
file data. This has been fixed in version 2.28.
• Fixed a bug where if the TCP_CLIENT mode is set, the module would randomly
attempt outgoing connections.
• Fixed a bug in FTP data write mode whereby sometimes the *OPEN* status string
came back over the UART before the file transfer was actually ready. This fix also
improves the speed of FTP open in write mode, such that the *OPEN* will be
faster.
F.6 VERSION 2.23 04/03/2011
• Created new set of sensor commands: set q sensor <mask> and set q sensor
<value>. Also, sensor power can now be configured and applied either only when
sampling of sensor inputs occur or at power up and removed upon power down
and sleep.
• Added a new FTP client mode to get and put files to a FTP server. Files retrieved
from the server are sent over the UART and files created from the UART are
stored on the FTP server.
• A new scan output format is implemented in addition to the default output format.
This new microprocessor friendly format makes string processing of the scan out-
put very easy.
• A new UART heartbeat feature is implemented to notify the embedded micropro-
cessor of the state of the WiFly module. The heartbeat message is sent over the
UART when the WiFly module is in data mode and not connected to any remote
host.
• Fixed a bug in the set uart instant <value> command wherein the WiFly module
would not return an AOK over telnet. Now when this command is issued, it returns
an AOK over telnet and does not exit command mode.
• Enabled scanning for wireless networks remotely when in ad hoc mode. When the