User manual

WiFly GSX
WiFlyGSX-um.pdf 12/14/2009
www.rovingnetworks.com
[e-mail]
Phone [phone]
- 38 -
16 Boot-up Timing Values
17 Supported Access Points
Access points that are set to MIXED mode (WPA1 and WPA2) may cause problems during association
because some of these incorrectly report their security mode.
We also currently do not support WPA2-Enterprise (radius server authentication, EAP-TLS)
The Wifly GSX should work with any standard Access Point. We have tested the WiFly-GSX module
with the following access points
• Cisco Aeronet series
• Linksys (both standard and openWRT linux)
• Netgear WGR614 v8
• Netgear WGN54
• DLINK dir-615
• Airlink 101
• Apple Airport express
• ADHOC MODE (Apple Iphone, Microsoft windows PC with XP, Vista , Ubuntu Linux)
Function Description Time (in ms)
Power up Powerup Time from Reset HIGH or power good to boot
code loaded.
70
Initialization Initialize ECOS 500
Ready Load configuration and Initialize application 30
Total time to READY 600
Join Associate using channel = 0 (full channel scan, mask =
0x1FFF)
80
Asso
ciate using channel = 0 (primary channel scan, mask
= 0x421)
15
Associate using channel = X (fixed channel) 5-20
Authentication Authenticate using WPA1 or 2 ( highly dependent on
Access Point response)
50 - 250
Aquire IP DHCP obtain IP address (highly dependent on DHCP
server response time )
30-???