User manual

WiFly GSX
WiFlyGSX-um.pdf 12/14/2009
www.rovingnetworks.com
[e-mail]
Phone [phone]
- 11 -
7-31 Reserved
set ip gateway <addr> sets the gateway IP address, If DHCP is turned on, the gateway IP
address is assign and overwritten during association with the access
point.
set ip host <addr> sets the remote host IP address. This command is used for making
connections from the WiFly module to a TCP/IP server at the IP
address <addr>.
set ip localport <num> sets the local port number.
set ip netmask <value> sets the network mask. If DHCP is turned on, the net mask is assign
and overwritten during association with the access point.
set ip protocol <value> sets the IP protocol. Value is a bit mapped setting. To connect to the
WiFly GSX module over TCP/IP such as Telnet the device must have
the use the TCP Server protocol / bit 2 set. To accept both TCP and
UDP use value = 3 (bit 1 and bit 2 set)
Bit Position Protocol
0 UDP
1 TCP Server & Client (Default)
2
Secure (only receive packets with IP address
matches the
store host IP)
3 TCP Client only
4 Future Use
set ip remote <value> sets the remote host port number.
5.7 OPTIONAL Parameters
set opt jointmr <msecs> Join timer is the time in milliseconds (default=1000) the join function
will wait for the an access point to complete the association process.
This timer is also the timeout for the WPA handshaking process.
set opt replace <char> replacement character for spaces. The replacement character is
used when entering SSID and pass phrases that include space. This
is used by the WiFly GSX command parser only. Each occurrence of
the replacement character is changed into a space. The default is
“$” (0x24)
set opt deviceid <string> Configurable Device ID - can be used for storing serial numbers,
product name or other device information. This information is sent
as part of the broadcast hello packet that is sent as a UDP. The
current value can be shown with the “get option” or “show deviceid”
commands. Max string size is 32 bytes. The default is “WiFly-GSX”.
set opt password <string> TCP connection password. Provides minimal authentication by
requiring any remote device that connects to send and match a