User manual

WiFly GSX/EZX
www.rovingnetworks.com WiFly-RN-UM 11/9/2011
809 University Avenue • Los Gatos, CA 95032 • Tel [phone] • [e-mail]
~ 84 ~
 Added new setting to the UART mode “set uart mode 0x10".
Features:
 Disabled the auto-join feature when in command mode. Auto-join causes WiFly to become
unresponsive to $$$ or commands during The period when auto-joining, when auto-joining is failing
do to non-existent AP, making it hard to process or interpret commands. Once command mode is
exited, auto join will re-enable.
 There are new levels of print out diagnostics that can be enabled/disable with the sys print variable.
Refer section 10.6 for more details
 Ability to add prefix to HTML client post, specifically the ability to append &id= and &rtc= in the
HTML message
Copyright © 2011 Roving Networks. All rights reserved..
Roving Networks reserves the right to make corrections, modifications, and other changes to its products,
documentation and services at any time. Customers should obtain the latest relevant information before placing orders
and should verify that such information is current and complete.
Roving Networks assumes no liability for applications assistance or customer product design. Customers are
responsible for their products and applications using Roving Networks components. To minimize the risks associated
with customer products and applications, customers should provide adequate design and operating safeguards.
Roving Networks products are not authorized for use in safety-critical applications (such as life support) where a
failure of the Roving Networks product would reasonably be expected to cause severe personal injury or death, unless
officers of the parties have executed an agreement specifically governing such use.