User manual

WiFly GSX/EZX
www.rovingnetworks.com WiFly-RN-UM 11/9/2011
809 University Avenue • Los Gatos, CA 95032 • Tel [phone] • [e-mail]
~ 77 ~
Protocol 2 ( TCP server and client )
MTU 1524
Flags 0x7
TCP mode 0x0
Backup 0.0.0.0
OPTIONAL PARAMETERS
Device ID WiFly-GSX
Join timer/WPA timer 1000
Replacement char $ (0x24)
Format 0x00
Password “” (no password enforced)
Signal 0
Average 5
SYSTEM PARAMETERS
Sleep timer 0
Wake timer 0
Trigger 0x1 (SENS0 pin wakes up the device)
Auto connect 0
IOfunc 0x0 (no alternate functions )
IOmask 0x20F0 (for RN-131) / 0x21F0 (for RN-171)
IOvalue 0x0
Print level 0x1 (prints enabled)
Debug Register 0x0 (Unused parameter for future development. Please leave it to default
values)
TIME SERVER PARAMETERS
Enable 0 (disabled)
Server address 129.6.15.28 (fixed to port 123 - SNTP protocol)
Zone 7 (pacific USA time)
UART PARAMETERS
Baudrate 9600
Flow 0 (disabled)
Mode 0
WLAN PARAMETERS
SSID roving1
Channel 0 (automatic scan)
External antenna 0 (off - use on-board chip antenna for RN-131 ONLY)
Join mode 1 (automatically scan and join based on ssid )
Authentication mode OPEN
Mask 0x1FFF ( all channels )
Rate 12 (24Mbit)