User manual

WiFly GSX/EZX
www.rovingnetworks.com WiFly-RN-UM 11/9/2011
809 University Avenue • Los Gatos, CA 95032 • Tel [phone] • [e-mail]
~ 75 ~
Example: To set the power to 1.2V automatically upon power up, the
command would be set q power 0x20. To set sensor power to 1.2V when
sampling event occurs, the command is set q power 0x02
Example: To set the power to 3.3V automatically upon power up, the
command would be set q power 0x40. To set sensor power to 3.3V when
sampling event occurs, the command is set q power 0x04