User manual

WiFly GSX/EZX
www.rovingnetworks.com WiFly-RN-UM 11/9/2011
809 University Avenue • Los Gatos, CA 95032 • Tel [phone] • [e-mail]
~ 69 ~
16.4. Updated scan output format to show WPS enabled AP
The scan output is modified to show AP that support WPS feature. Also, when a scan is performed after
the WPS button is pushed on the AP, the scan returns a –A to indicate the AP is in WPS “active mode”.
In the above diagram, the APs that support WPS are listed with WPSPB in the security suites. When the
WPS button is pushed on an AP, it will show up as –A shown below.