User manual

WiFly GSX/EZX
www.rovingnetworks.com WiFly-RN-UM 11/9/2011
809 University Avenue • Los Gatos, CA 95032 • Tel [phone] • [e-mail]
~ 62 ~
With the above settings enabled, the WiFly module will connect out to the web server every time it receives
data on the RX line. Serial data is sent to the host web server according to the flush timer and the flush size.
.
NOTE: You cannot append the sampled sensor data to the UART data. Enabling “option format 7”
along with “set uart mode 2” will result in erroneous data being sent.