User manual

!
www.rovingnetworks.com Version 1.0r 9/21/2012 39
RN-WIFLYCR-UM
open <address> <value>
This command opens a TCP connection to <address>, where <value> is the port number and <address> is an IP
address in the form <value>.<value>.<value>.<value> with <value> being a number between 0 and 255. If you do
not use the <address> and <value> parameters, the module attempts to connect to the stored remote host IP address
and remote port number. <address> can also be a DNS host name that the module attempts to resolve.
Default: Stored remote IP address and port
Example: open 10.20.20.62 2000 // Open a connection to 10.20.20.62 port 2000
ping <string> <value>
This command pings a remote host, where <string> is one of the parameters shown in Table 14 and <value> is the
number of pings to send. By default, the module sends 1 packet. The optional <value> sends < value> pings, at 10
per second.
Table 14. ping Command Parameter Options
Option
Description
g
This option pings the gateway. The gateway IP address is loaded if DHCP is turned on; otherwise, you must
set it using the set ip gateway <address> command.
h
This option pings the stored host IP address. You can set the host IP address using the set ip host
<address> command.
i
This option pings a known Internet server, www.neelum.com, by first resolving the URL. This option is useful
to demonstrate that DNS is working and that the device has Internet connectivity.
0
This option terminates a previously issued ping command.
<address>
Ping a remote host where <address> is an IP address in the form <value>.<value>.<value>.<value> with
<value> being a number between 0 and 255.
Default: 1 packet
Example: ping 10.20.20.12 10 // Ping 10.20.20.12 10 times
reboot
This command forces the module to reboot (similar to a power cycle).
Example: reboot // Reboot the module