User manual

!
www.rovingnetworks.com Version 1.0r 9/21/2012 32
RN-WIFLYCR-UM
set wlan rate <value>
This command sets the wireless data rate, where <value> is a value shown in Table 13. Lowering the data rate
increases the effective range of the module.
Table 13. set wlan rate Command Options
Value
Wireless Data Rate (Mbits/second)
0
1
1
2
2
5.5
3
11
4 - 7
Invalid
8
6
9
9
10
12
11
18
12
24 (default)
13
36
14
48
15
54
Default: 12
Example: set wlan rate 13 // Set the data rate to 36 Mbits/second
set wlan ssid <string>
This command sets the SSID with which the module associates, where <string> is 1 to 32 characters (32 bytes).
NOTE: <string> cannot contain spaces. If the SSID has spaces, use the $ character to indicate the space. For
example, yellow brick road becomes yellow$brick$road. When you use the get wlan command to view
the SSID, the module properly displays is as SSID=yellow brick road.
Default: roving1
Example: set wlan ssid my_network // Set the SSID to my_network