User manual

!
www.rovingnetworks.com Version 1.0r 9/21/2012 14
RN-WIFLYCR-UM
set ftp filename <filename>
This command sets the name of the file that is transferred when issuing the ftp u command, where <filename> is the
firmware image. If you specify any file other than the firmware image, the WiFly module downloads the file and issues
the UPDATE FAIL=3 error.
Default: wifly_GSX-<version>.img (RN-131), wifly_EZX-<version>.img (RN-171)
Example: set ftp filename my_data // Sets the firmware image to be retrieved via FTP as
// my_data
set ftp mode <mask>
This command sets the ftp mode, where <mask> indicates active or passive mode.
Default: 0x0
Example: set ftp mode 0x1 // Enables active FTP mode
set ftp remote <value>
This command sets the FTP server’s remote port number, where <value> is the port number.
Default: 21
Example: set ftp remote 25 // Sets the FTP server’s remote port to 25
set ftp time <value>
The command sets the FTP timeout value, where <value> is a decimal number that is five times the number of
seconds required. The module uses this timer to close the FTP connection automatically after the specified time.
Default: 200
Example: set ftp timer 40 // Sets a 5-second timer
set ftp timer 80 // Sets a 10-second timer
set ftp user <string>
This command sets the user name for accessing the FTP server, where <string> is up to 16 characters (16 bytes).
Default: roving
Example: set ftp user my_username // Sets the user name to my_username
set ftp pass <string>
This command sets the password for accessing the FTP server, where <string> is up to 16 characters (16 bytes).
Default: Pass123
Example: set ftp user my_password // Sets the user name to my_password