User manual

WiFly GSX
www.rovingnetworks.com WiFlyGSX-um 7/16/2010
809 University Avenue • Los Gatos, CA 95032 • Tel [phone] • [e-mail]
~ 20 ~
13 36 Mbit/sec
14 48 Mbit/sec
15 54 Mbit/sec
set wlan ssid <string> sets the wlan ssid to associate with. 1-32 chars.
NOTE: If the passphrase or ssid contain the SPACE ( ‘ ‘)
characterS, these can be entered using substitution via the “$” character.
For example, if the ssid of the AP is “yellow brick road”
You would enter “yellow$brick$road”
Using the ‘get w” command will properly display the value:
SSID=yellow brick road.
set wlan window <value> sets the IP maximum buffer window size. Default is 1460 bytes.
6. Get Commands
These commands begin with “get”. They display the current values.
get adhoc display all adhoc settings.
get broadcast will display the broadcast UPD address, port and interval
get everything displays all configuration settings, useful for debug.
get com display comm. settings.
get dns display DNS settings.
get ftp display FTP settings.
get ip <a> display IP address and port number settings. Optional parameter just returns the
current IP address value.
get mac display the device MAC address.
get option display the option settings like device ID
get sys display system settings, sleep, wake timers, etc.