User manual

BlueSentry User Manual
www.rovingnetworks.com BlueSentry-um Version 1.0 3/12/2010
809 University Avenue • Los Gatos, CA 95032 • Tel [phone] • [e-mail]
~ 6 ~
2. Pairing: Next you must pair with the device by double clicking on RN_BS-wxyz in the list. Select “Enter
the device’s pairing code” option from the list. Enter the default pin code of 1234. Once the Bluetooth
device manager completes you will see a message to the effect, “Bluetooth device installed on COMX”
where COMX is unique to your machine. In some cases the Bluetooth device manager will create two
COM ports, in this case you only want to use the COM port labeled “outgoing”.
3. Connecting: To establish a Bluetooth connection, open up the COM port assigned to the device from
either your application or a terminal emulator. Once connected, data will flow in both directions as if the
serial port were locally attached.