Operating instructions

Bulb Replacement
81
Rear light unit
Remove three screws to releasethe lens. The lens is made in two
parts, which slot together. When replacing the lens, the upper part
must be placed in position first; the lower part then ’capturing’the
upper as the screwsare tightened.
Push and twist anti-clockwiseto remove a bulb.
1. Direction indicator.
2. Brake/tail light (Note the ’stepped’ bayonet fitting; this ensures
that the twin filamentbulb is replaced correctly).
3. Reversing light.
1
2
3
H2142