Operating instructions

Fuses

MAIN FUSE BOX - Checking or renewing a fuse

1. Turn off the starter switch and all electrical equipment.

2. Remove the fuse box cover (usea coin to turn the retaining

screw a quarterturn to left or right), then refer to the chart to

identify the suspectfuse.

3. Hold the head of the fuse and pull to remove.A blown fuse can

be recognised by a break in the wire (see illustrationon the

following page).

4. Replace a blown fuse with another of the same, or lower, rating.

Note that there are a number of spare fuses around the

perimeter of the fuse box.

If a replacementfuse fails almost immediately, refer the problemto

your dealer.

In brief ..........

Fuses are simple circuit

breakers, which protect the

car’s electrical equipment by

preventing the electrical circuits

from being overloaded.

A blown fuse may be indicated

when the item of electrical

equipment it protects stops

working.

For Your Safety .........

Turn off the starter switch and

all electrical equipment before

changing a fuse.

Only replace a fuse with one of

the same, or lower, rating.

Fuse colours:

RED 10 amp

BLUE 15 amp

YELLOW 20 amp

CBA

H2165A