Technical data

Cruise Control
93
2
To increase cruising speed
Press and hold the ‘SET+’ switch; the car will accelerate
automatically. Release the switch when the desired speed has been
reached. Alternatively, the speed can be increased incrementally by
slowly tapping the ‘SET+’ switch. For each tap the speed will
increase by 1.6 km/h.
To reduce cruising speed
Use one of the following methods:
• Use the brake pedal to slow the car until the required speed has
been reached, then press the ‘SET+’ switch to establish a new
cruising speed (remember that cruise control will not operate at
speeds below 45 km/h.
• Alternatively, press the ‘RES’ switch once. This will cut off
cruise control and, provided the brake pedal is not used, the car
will slow down gradually. When the desired speed has been
reached, press the ‘SET+’ switch to establish the new cruising
speed.
Disengaging cruise control
Cruise control will disengage, without cancelling the speed held in
its memory, when:
• The brake or clutch pedal is pressed.
• Your road speed falls to less than 75% of the set speed (this
could occur when climbing hills or when towing).
• The ‘RES’ switch is pressed.
To re-engage cruise control at the previously set speed, press the
‘RES’ switch.
NOTE: The speed held in the cruise control memory will be cancelled
when either the cruise control master switch, or the starter switch are turned
off.