Technical data

176

Bulb Replacement

Headlights - Main Beam

• Press the plastic cover release catch and pivot the cover (1) away

from the rear of the light unit.

• Pull the electrical connector (2) from the back of the headlight

bulb.

• Unhook the wire retaining clip (3), and pivot away from the

rear of the bulb.

• Remove the bulb (4).

When replacing the bulb, ensure that the rectangular tab is

vertically aligned at the top.

When replacing the electrical connector, check with the

illustration to ensure that it is fitted the correct way round

When replacing the plastic cover, angle the cover so that the two

hooked pegs at the base of the cover (arrowed in illustration) locate

securely in the corresponding sockets in the light unit, then close

the cover. Ensure that the catch is secure.

During use, Halogen headlight bulbs may shatter if the glass

has been scratched, or contaminated with oil or perspiration.

DO NOT touch the glass. If handled, clean with methylated spirits

and a clean cloth.

FRONT FOG LIGHTS*

As removal of the front bumper is necessary, we recommend that

front fog light bulb replacement should only be carried out by

qualified personnel.

HB0184

4 2