Technical data

Puncture Repair & Wheel Changing
165
5
Removing the wheel nut cover (alloy wheels)*
Insert the hooked end of the removal tool into the small
rectangular aperture in the wheel nut cover (arrowed in
illustration). Pull the wheel nut cover from the wheel to access the
wheel nuts.
Positioning the jack
NEVER work beneath the car with the jack as the only means
of support. The jack is designed for wheel changing only!
Position the jack under the jacking point nearest the wheel to be
removed (note that arrows pressed into the sills identify the four
jacking points). Turning the jack screw by hand, raise the jack until
the jack head fits snugly around the centre of the jacking point.
Ensure that the base of the jack is in full contact with the road
surface.
Never jack the car using any jacking points other than the
designated points shown. Serious damage to the car could
result.
HB0586
HB0223