Users Manual

Some trucks/car’s 12V cigarette outlet is always HOT, which means it
provides constant power even when the car is turned OFF and LOCKED. If
this is the case for your vehicle, then the auto ON/OFF feature will not
work. And If you leave the camera continuously recording when the car is
turned off, then it will drain your car/truck’s battery and you might not
have enough power to start your car for next time. To Remedy this
situation, you can do one of the two option.
Hardwire your dash cam to your car’s fuse box with ROVE’S 3-Lead
Auto Trigger Hardwire Kit.
Visit “www.rovedashcam.com” to purchase one separately.
Change the connection in the fuse box for your 12V outlet to socket which
only supplies power when car key is turned to ACC or ON position.
CAUTION
•
•
Manual Power ON/OFF
To manually turn ON: Press and HOLD the power button
for approximately 10-12 Seconds until the camera turns ON.
To manually turn OFF: Press and hold the power button
for Approximately 4-5 Seconds until the camera turn OFF.
The best and faster way to turn the camera on/off is to
just plug/unplug the power cable.
•
21