Users Manual

Start the car’s engine and check if the dash cams are

working correctly.

Make sure to remove the Plastic Lens Screen Protector from the lens before

recording videos. Otherwise your videos will look blurry and blocked.

Do not remove the Micro-SD card while the camera is turned ON.

Otherwise it may cause memory card to be write protected and possible

loss of data or damage your memory card. Always remove/insert memory

card while camera is turned OFF

After a test drive, check and make sure if all the videos are recorded correctly.

Note

CAUTION

Plug the rear camera's cable into the front camera's rear

connecting port.

Adjust the lens angle of the front, cabin, and rear cameras

accordingly.