Tus neeg siv phau ntawv

Redback® A 4395A 500W Mixer Amplier
www.redbackaudio.com.auRedback® Proudly Made In Australia4
Fig 1 shows the layout of the front panel.
Fig 1
1 Input 1 volume control
Use this control to adjust the output volume of input 1.
2 Vox level control
Use this control to adjust the vox sensitivity of input 1.
3 Input 2 volume control
Use this control to adjust the output volume of input 2.
4 Music Input
Use this input to connect a portable music player. This input over-rides the rear input 2 and is adjusted via the
volume 2 control.
5 Bass and Treble Controls
Use these controls to adjust the bass and treble.
6 Signal Presence Indicator
This LED indicates when an input signal is present.
7 Peak Limit Indicator
This LED indicates when the input signal is clipping.
8 VOX Active Indicator
This led indicates when the VOX muting is active.
9 Over Temp Indicator
This LED indicates when the amplier is overheating. The output will be disconnected until the amplier is once
again cool enough to operate.
10 Current Limit Indicator
This LED indicates when the output is drawing too much current from the amplier. The output will be
disconnected until the current draw is reduced.
11 Shut Down Indicator
This LED indicates when the amplier has an over temp occurrence or if the internal circuitry has a fault.
12 24V DC Indicator
This LED indicates when the amplier is being powered from the 24V input.
13 Mains Indicator
This LED indicates when the amplier is being powered from the mains (230V AC).
14 On Indicator
This LED indicates the unit has power.
15 Power Switch
Use this to turn the unit on.
15
0
2
4
6
8
10
0
2
4
6
8
10
1 2
3
4 5
6 7 8 9 10 11 12 13 14
Mains
On
Power
24V DC
Power StatusSignal Status
Present
Fault Status
Over
Limit Limit
Current
Temp
Peak
Down
Shut
Model : A 4395A
500W
Public Address Mixer
TrebleBass
Music
Input
VOX
Sens.
Volume 1
Volume 2
Active
VOX