Tus neeg siv phau ntawv
Redback® A 4395A 500W Mixer Amplier
www.redbackaudio.com.au Redback® Proudly Made In Australia 3
OVERVIEW
The Redback A 4395A is a 500 Watt Mixer amplier for installations requiring a high power zone amplier. Ideally suited
for use in shopping centres, pedestrian precincts, public transport facilities and convention centres.
The amplier has two audio inputs, with input 1 either a balanced XLR input or dual RCA line input, and input 2 a dual
RCA. There is also a music input on the front of the amplier for connection of portable devices. This input when
connected, over-rides the rear input 2 audio source and is adjusted via the volume 2 level control.
A VOX circuit with front panel sensitivity adjustment, allows input 1 to mute input 2. Phantom power (15 volts) is available
at the 3 pin XLR on input 1 and both inputs 1 and 2 have adjustable input sensitivies.
The amplier has a host of protection circuitry including over current, over voltage and short circuit protection.
FEATURES
• Robust design incorporating latest Mosfet technology
• Very Low noise and distortion
• 70V, 100V and 4-16Ω outputs
• 240V AC or 24V DC operation
• 24V DC @ 1 Amp output for external devices
• 300mA battery trickle charge
• Adjustable input level sensitivities
• Bass and Treble controls
• Phantom power on microphone input (XLR Input 1)
• Multi stage thermally cued fan cooling
• Output Peak Limited
• Thermal Overload protected
• Signal Presence Indicators
• Fault Indicators
• Power Status Indicators
• Rack Mountable (suits 19 inch racks)