User manual

The default is the alert panel beep, but you can choose any sound, tone, MP3

or music track. You can record and use your own sound. The Settings GPS tab

also contains a volume slider to control the volume of the alarm.

Sound and Video Links

You can add a sound or video link to a waypoint or POI and it will be played

when you first reach that point. To add a sound link use the Details view's ‘Add

sound link’.

Alternatively in the description type using the format:

<sound SoundFile.wav>Description</sound>

This will appear as underlined text Description, which you can click on to play

the sound file ‘SoundFile.wav’.

This sound will be played once when you first reach the POI or waypoint. After

being played the alarm will switch to the usual alarm tone until silenced.

You could record a short description, which is played as you reach a point, or

could have a special sound.

This link is saved into GPX files and is imported from GPX files, if you prepare

routes elsewhere.

Videos can be embedded using the link format:

To be played as an alarm the video must further be surrounded by alarm tags,

which can also be added around sounds:

<alarm><link href=”video.3gp”>Video</link></alarm>