User manual
Bearing – if you are navigating along a route or towards a point, this shows the
bearing you should take to the next point.
Navigation arrow – the navigation arrow, displayed when you are navigating
along a route or towards a point. It indicates the direction to go relative to your
current direction to reach the next point. The colour changes, as described in
the navigation section of the user manual.
Final destination – the name of the route or target point.
Final distance – the distance to the target point or end of the route.
Final ETA – the estimated time of arrival at the target point or route end.
Final ETE – the estimated time elapsed (the time it will take) to reach the target
point or route end.
Next destination – the name of the target point or next waypoint.
Next distance – the distance to the target point or next waypoint.
Next ETA – the estimated time of arrival at the target point or next waypoint.
Next ETE – the estimated time elapsed (the time it will take) to reach the target
point or next waypoint.
Cross track error – the distance you are away from the planned route. Arrows
indicate the direction to get back to the route.
Velocity made good (VMG) – the velocity taking into account the target
destination. If you are travelling at 10kmph but your heading is not directly to the
target point, this shows the component of speed that is towards the point.
Hdop (accuracy) – the GPS accuracy figure. Values of 1 are perfect, higher
figures are progressively worse. Text is also displayed to give a qualitative
description of the figure.
Sunset – the time of sunset, sunrise and solar noon (when the sun is at its
highest). These are calculated for the current GPS position and for the phone’s
current date and time zone. To see the sunset on a different day temporarily
change the phone’s date setting.
Compass – if your phone contains an electronic magnetic compass, this
displays the compass arrow and circle.
Blank – the field has nothing displayed.
Other Trip Settings
There are two other settings in Trip settings:
Pace speed – this sets the fixed pace speed, that is the target speed that the
‘Pace versus fixed speed’ field compares your current speed against. This value
46