User manual

Retrieva specific commands
To tell a Retrieva tracker to go to roam mode or to track mode, highlight a
Retrieva tracker in the list, press the cursor pad centre or button and choose
'Request roam mode' or 'Request track mode'.
Globalsat specific commands
Motion mode - asks the globalsat tracker to enter its motion mode, where it
reports when it moves.
Parking mode - asks the Globalsat tracker to enter its parking mode. It will
send regular location reports at a frequency you choose, and if the tracker starts
moving will send alarm messages at a different frequency.
Voice monitor - asks the Globalsat tracker to phone you back, so you can
listen to what is happening.
Geofences
The Globalsat TR151 supports Geofences. Using ViewRanger you can set up a
Geofence around a location. You will be alerted if the tracker moves outside
that area. To setup a geofence:
● Highlight the tracker in the list, press the cursor pad centre or and
choose 'Add geofence'
● You will be asked if you'd like to use the tracker's current location as the
centre for the geofence's circle. Answer yes or no.
● If you answered no, or if ViewRanger doesn't know the location of the
tracker, you'll be asked if you'd like to use the centre of the current map
view as the centre for the geofence's circle. Answer yes or no.
● You will be asked to enter the radius of the geofence circle, for example
100 metres.
● You'll be asked to enter a count for how many times you wish to be
informed of a breach. Enter 0 for indefinitely or a number to limit it the
number of reports. The frequency of reporting is set in the Settings.
The TR151 accumulates several fences. To clear the geofences highlight the
tracker in the list, press the cursor pad centre or and choose 'Send
stop/clear'.
118