User manual
ROUTE 66 Mobile 2006 Symbian UIQ
8
Installing Other Geographic Map(s) and Voice Instructions on
the Memory Card
You can (re)install the navigation software, geographic map(s) and voice instructions from the enclosed
CD(s) onto your memory card.
When you use the installation CD(s) for the first time, you first have to manually format your memory card
(see Formatting your Memory Card below for how to do this). If you have completed an earlier installation
using the CD(s), you can immediately proceed with the steps below.
1. Connect the memory card reader & writer to the USB port of your computer, then insert the memory
card into the memory card reader & writer and the CD into the CD drive.
2. The installation should start automatically. If it does not start, please run setup.exe from the CD(s).
3. Select the language you want the installation to be performed in, e.g., "English", and click Next.
4. Click Next to continue.
5. Select the drive where the files should be installed. Click Next to continue.
6. Read the license agreement carefully, select the first option and click Next to continue.
If the geographic map(s) and voice instructions are already installed on your memory card, choose the
relevant option and click Next to continue:
Modify to select new components to install or deselect the components to remove (see steps 7
to 10 below).
Repair to reinstall the components that were previously installed (see steps 7 to 10 below).
Remove to remove the installed components (see step 10 below).
7. Select the language of the voice instructions (e.g., "English") you want to install onto the memory
card. Note: The default language is identical to the Setup Language. Click Next to continue.
8. Select the geographic map(s) you want to install onto the memory card (e.g., "United Kingdom &
Ireland"). Click Next to continue.
9. Click Install to start installing the geographic map(s) and the voice instructions onto the memory
card. (For products with more than one CD: please note that not all CDs are necessarily asked for
during the installation process. This depends on which map(s) you have selected for installation in
step 8).
10. Click Finish to complete the installation / maintenance process. The geographic map(s) and voice
instructions are now installed on your memory card and can be used for navigation.
Formatting Your Memory Card
Formatting the memory card maximizes the free space on the memory card and optimizes the speed of
reading and writing files from / onto the memory card.
Warning:
Formatting will erase ALL data on the memory card. Note that “ROUTE 66 Mobile 2006” can always be
restored on your memory card using the CD(s), but you may want to backup other data (e.g., photographs or
MP3s) that you have stored on the memory card.
1. Insert your memory card into the memory card reader & writer.
2. Connect your memory card reader & writer to a USB port of your PC.
3. Open (double-click) My Computer on your PC. The corresponding memory card appears in the
Devices with Removable Storage section as “Removable Disk”. Make sure this is the correct
memory card (e.g., disconnect the memory card reader & writer and verify that the disk disappears
from the list; next, reconnect your memory card reader & writer).