User manual

ROUTE 66 Mobile 2006 Symbian UIQ
4
o Red: the battery power is low, charging is required immediately.
o Yellow: the battery is being charged.
o Off: the battery is fully charged, the battery has adequate power.
• GPS Status LED (green LED in the middle)
o Flashing green light: the GPS receiver is switched on and the GPS position is fixed.
o Steady green light: the GPS receiver is switched on but the GPS position is not yet fixed.
• Bluetooth Status LED (rightmost blue LED)
o Flashing blue light: the Bluetooth connection is established.
Getting Started
To start using “ROUTE 66 Mobile 2006”, you have to carry out the following steps:
• Step 1: Charge the battery of the Bluetooth GPS receiver
1. Before you can use the Bluetooth GPS receiver, the battery has to be fully charged. In order
to do so, you have to connect the charger cable to the power jack of the GPS receiver and to
plug it into the cigarette lighter outlet of your car. While the battery is being charged, the
Battery Status LED will show a yellow light. Note that the Bluetooth GPS receiver standard
comes with a fully charged battery.
2. As soon as the battery is fully charged, the Battery Status LED will turn off. Now you can
unplug the charger cable from the GPS receiver and from the cigarette lighter outlet of your
car.
• Step 2: Switch on the Bluetooth GPS receiver and wait for a fixed GPS position
1. After you have switched on the Bluetooth GPS receiver, the GPS Status LED will initially
show a steady green light to indicate that the GPS position has not been fixed yet.
2. After the position has been fixed, the GPS Status LED will change into a flashing green light.
Now the Bluetooth GPS receiver is ready to be connected to your smartphone.
• Step 3: Insert the memory card into your smartphone and launch “ROUTE 66 Mobile 2006”
1. Insert the memory card into your smartphone. See the documentation of your smartphone
for how to insert the memory card.
2. Switch on your smartphone and launch “ROUTE 66 Mobile 2006”.
• Step 4: Activate “ROUTE 66 Mobile 2006”
1. If you are launching “ROUTE 66 Mobile 2006” for the first time, you are automatically
requested to activate the product. See below how to activate your product.
• Step 5: Start navigating
1. Tap on the map and select Navigate to. Tap Locations, enter a search text that contains
information about the address where you want to go and tap Search. Select your destination
from the list of search results and tap on it to start navigating to it.
2. As soon as you select Navigate to, the smartphone will automatically carry out a search for
Bluetooth devices in your neighbourhood. Select the Bluetooth GPS receiver and set it as
the Default GPS receiver.
3. After the Bluetooth connection between the smartphone and the Bluetooth GPS receiver has
been established, the Bluetooth Status LED will show a flashing blue light and you can start
navigating.
Product Activation
Before you can start using "ROUTE 66 Mobile 2006”, you have to activate the product first. In order to do
this, you should go to the Applications screen, scroll down and select “Mobile 2006”.