MSDS

Monsanto Company, Lawn & Garden Products
Page: 4 / 13
Roundup® Concentrate Max Control 365
Version: 1.0
Effective date: 04/01/2013
Protect from freezing.
Partial crystallization may occur on prolonged storage below the minimum storage temperature.
If frozen, place in warm room and shake frequently to put back into solution.
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Airborne exposure limits
Components
Exposure Guidelines
Isopropylamine salt of glyphosate
No specific occupational exposure limit has been established.
Ammonium salt of imazapic
No specific occupational exposure limit has been established.
Diquat dibromide
TLV (ACGIH): 0.5 mg/m3: inhalable fraction, skin, The exposure limit
indicated is for the diquat cation.
TLV (ACGIH): 0.1 mg/m3: respirable fraction, skin, The exposure limit
indicated is for the diquat cation.
PEL (OSHA): No specific occupational exposure limit has been established.
Surfactant(s), water and minor
formulating ingredients
No specific occupational exposure limit has been established.
Engineering controls
No special requirement when used as recommended.
Eye protection
If there is significant potential for contact:
Wear chemical goggles.
Skin protection
Wear chemical resistant gloves.
Chemical resistant gloves include those made of waterproof materials such as nitrile, butyl, neoprene, polyvinyl
chloride (PVC), natural rubber and/or barrier laminate.
If there is significant potential for contact:
Wear face shield.
Wear chemical resistant clothing/footwear.
Applicators and other handlers must wear:
Wear long sleeved shirt, long pants and shoes with socks.
Follow manufacturer's instructions for cleaning/maintaining Personal Protective Equipment.
If no such instructions for washables, use detergent and hot water.
Keep and wash personal protective equipment separately from other laundry.
Respiratory protection
No special requirement when used as recommended.
When recommended, consult manufacturer of personal protective equipment for the appropriate type of equipment
for a given application.
9. PHYSICAL AND CHEMICAL PROPERTIES
These physical data are typical values based on material tested but may vary from sample to sample. Typical values
should not be construed as a guaranteed analysis of any specific lot or as specifications for the product.
Colour/colour range:
Clear - Pale brown
Odour:
Slight, Musky
Form:
Liquid, free from foreign materials