SDS
Monsanto Company, Lawn & Garden Products
Page: 5 / 10
Roundup® Ready-To-Use Max Control 365
Version: 1.0
Effective date: 05/13/2015
Auto ignition temperature:
No data.
Self-accelerating decomposition
temperature (SADT):
No data.
Oxidizing properties:
No data.
Specific gravity:
1.0031 @ 20 °C
Vapour pressure:
No significant volatility; aqueous solution.
Vapour density:
Not applicable.
Evaporation rate:
No data.
Dynamic viscosity:
1.5 cP @ 20 °C
Kinematic viscosity:
Not applicable.
Density:
1.0031 g/cm3 @ 20 °C
Solubility:
Water: 11.6 g/l @ 25 °C Completely miscible.
pH:
~ 5.2 @ 23 °C 10 g/l
Partition coefficient:
log Pow: -3.2 @ 25 °C (glyphosate)
Partition coefficient:
log Pow: 0.393 25 °C (imazapic)
Partition coefficient:
log Pow: -4.6 @ 20 °C (diquat dibromide)
10. STABILITY AND REACTIVITY
10.1. Reactivity
Reacts with galvanised steel or unlined mild steel to produce hydrogen, a highly flammable gas that could
explode.
10.2. Stability
Stable under normal conditions of handling and storage.
10.3. Possibility of hazardous reactions
Reacts with galvanised steel or unlined mild steel to produce hydrogen, a highly flammable gas that could
explode.
10.4. Incompatible materials
galvanised steel;unlined mild steel;see section 10.;
Compatible materials for storage: see section 7.2.
10.5. Hazardous decomposition
Thermal decomposition: Hazardous products of combustion: see section 5.
11. TOXICOLOGICAL INFORMATION
This section is intended for use by toxicologists and other health professionals.
Likely routes of exposure: Skin contact, eye contact, inhalation, ingestion
Potential health effects
Eye contact, short term: Causes moderate but temporary eye irritation.
Skin contact, short term: Not expected to produce significant adverse effects when recommended use
instructions are followed.
Inhalation, short term: Not expected to produce significant adverse effects when recommended use instructions
are followed.
Single ingestion: Not expected to produce significant adverse effects when recommended use instructions are
followed.
Data obtained on similar products and on components are summarized below.