Product Manual

SPECIFICATION
Inlet/ Outlet: 1in./ 3/4in.
Pumping capacity: 8 GPM
Telescoping suction pipe:
37in.
Fluid compatibility
If in doubt about compatibility of a specific fluid, contact supplier of fluid to check for any adverse reactions to
the wetted materials.
The pump is compatible with the following fluids:
z AdBlue, diesel, bio diesel, heating oil, water and many other chemicals with less than 40% Nitric acid
DIAGRAMS AND PARTS LIST
Part No. Description Qty. Part No. Description Qty.
1 Discharge spout 1 11 Rear Casing 1
2 Screw & Nut 20 12 Crank arm 1
3 Front casing 1 13 Set screw 1
4 Gasket 2 14 Handle 1
5 Oil seal 1 15 Handle shaft 1
6 Rotor 1 16 Bung adapter 1
7 Vane 2 17 Locking nut 1
8 Spring shaft 1 18 Suction tube 3
9 Vane spring 1 19 Strainer 1
10 Cylinder 1
For replacement parts and technical questions, please call 1-800-222-5381.