Product Manual

ManualsBrandsRoughneck ManualsDC Powered Fuel PumpsPortable 12V Fuel Transfer Pump Kit — 10 GPM, Manual Nozzle, Hose

Thank you very much for choosing a Roughneck® Product! For future reference, please

complete the owner’s record below:

Model: _______________ Purchase Date: _______________

Save the receipt, warranty and these instructions. It is important that you read the entire manual

to become familiar with this product before you begin using it.

This machine is designed for certain applications only. The distributor cannot be responsible for

issues arising from modification. We strongly recommend this machine is not modified and/or

used for any application other than that for which it was designed. If you have any questions

relative to a particular application, DO NOT use the machine until you have first contacted

distributor to determine if it can or should be performed on the product.

For technical questions, please call 1-800-222-5381.

WARNING: Read carefully and understand all INSTRUCTIONS before operating.

Failure to follow the safety rules and other basic safety precautions may result in

serious personal injury.

Save these instructions in a safe place and on hand so that they can be read when required.

Keep these instructions to assist in future servicing.

INTRODUCTION

The fuel box is made from high density polyethylene material. 1PC DC pump equipped with the

suction pipe, delivery hose and nozzle are fixed and installed internal of the box. For more

convenient operation, the pump and fittings are connected by rotating swivel connector.

PUMP: self-priming, volumetric, rotating vane pump, equipped with by-pass valve. With the

3/4in. rotating swivel connector.

The pump is designed to transfer diesel fuel only, for intermittent use with a working cycle of 30

minutes under maximum back pressure conditions.

MOTOR: Brush motor, DC, low tension with intermittent cycle, closed type in protection class

IP55, directly flanged to the pump body.

SUCTION TUBING:

- Minimum recommended nominal diameter: 3/4in.

- Nominal recommended pressure: 10bar/145PSI

- Use tubing suitable for functioning under suction pressure

DELIVERY TUBING:

- Minimum recommended nominal diameter: 3/4in.

- Nominal recommended pressure: 10bar/145PSI

Nozzle:

- Aluminum Manual nozzle

- Connection: 3/4in.

TECHNICAL SPECIFICATIONS

Portable Fuel Transfer Box Kit

OWNER’S MANUAL

Portable Fuel Transfer Box Kit OWNER’S MANUAL

Item#s 41874

1 of 9

WARNING: Read carefully and understand all INSTRUCTIONS before

operating. Failure to follow the safety rules and other basic safety

precautions may result in serious personal injury.

Model No.

Electrical power

Current

Fuses

Working pressure

Flow rate range

Delivery hose

41874

DC 12V

Max. 24 Amp

Max. 18 PSI

40 LPM/ 10GPM

3/4in. x 13ft.

Summary of content (6 pages)

PAGE 1
Portable Fuel Transfer Box Kit OWNER’S MANUAL Portable Fuel Transfer Box Kit OWNER’S MANUAL Thank you very much for choosing a Roughneck® Product! For future reference, please complete the owner’s record below: Model: _______________ Purchase Date: _______________ Save the receipt, warranty and these instructions. It is important that you read the entire manual to become familiar with this product before you begin using it. This machine is designed for certain applications only.
PAGE 2
Portable Fuel Transfer Box Kit OWNER’S MANUAL GENERAL SAFETY REGULATIONS WARNING: Read and understand all instructions. WARNING: The warnings, cautions, and instructions discussed in this instruction manual cannot cover all possible conditions or situations that could occur. It must be understood by the operator that common sense and caution are factors that cannot be built into this product, but must be supplied by the operator. 1. Keep the work area clean and dry.
PAGE 3
Portable Fuel Transfer Box Kit OWNER’S MANUAL Temperature：Min -4°F (-20°C) / Max +140°F (+60°C) Relative Humidity: Max 90% 2. ELECTRICAL POWER SUPPLY The pump must be supplied by a single-phase alternating current line whose nominal values are shown in the table TECHNICAL SPECIFICATIONS above. The maximum acceptable variation from the electrical parameters is voltage ± 5% of the nominal value.
PAGE 4
Portable Fuel Transfer Box Kit OWNER’S MANUAL 4. ELECTRICAL CONNECTIONS The transfer pump features a terminal strip box with a safety fuse and pincers for connection to a 12V battery. The terminal strip box features: • ON/OFF switch; • 25 Amp safety fuse against short circuits and overcurrent • 6½-ft.
PAGE 5
Portable Fuel Transfer Box Kit OWNER’S MANUAL • Under normal working conditions the noise emission from all models does not exceed the value of 70 db at a distance of 1 meter from the electric pump.
PAGE 6
Portable Fuel Transfer Box Kit OWNER’S MANUAL 17510413 PUMP 6 7 8 9 10 11 12 13 5 4 3 2 14 1 15 16 Part No. 1 2 3 4 5 6 7 8 Description SCREW M5×10 FRONT COVER O-RING VANES ROTOR MOTOR O-RING WASHER Q’ty 16 1 1 5 1 1 2 4 Part No. 9 10 11 12 13 14 15 16 Description PUMP BODY MOTOR O-RING SCREW JUNCTION BOX FUSE O-RING BASE For replacement parts and technical questions, please call 1-800-222-5381. WARRANTY One-Year Limited Warranty Distributed by Northern Tool + Equipment Co., Inc.