Product Manual

Page 8 of 16
3. Press the RESET button to reset BATCH total to zero. The TOTAL display cannot be reset.
Accessing the Programming Menu
(setting the decimal place)
1. To enter in the programming menu, press the RESET button for 5 seconds.
2. The LCD will display MENU in the lower left-hand corner and the number of decimal places
currently set on the main display.
3. Press the MODE button to cycle through options available.
• dEC .1 = 1 decimal place
• dEC .22 = 2 decimal places
• dEC .333 = 3 decimal places
Configuring Units
1. Press the RESET button to move to the Measurement Units Configuration.
2. The LCD will now display UNIT in the lower left-hand corner and BATCH on the main display. The
units are currently set as liters, as the letter ‘L’ indicates.
3. Press the MODE button to cycle through options available.
• L
• GAL
• Qt
• Pt
• Oz
• dL