Product Manual
Page 4 of 8
Next, the meter will reset the present total to 0.00.
RESETTING THE RESETTABLE TOTAL (See Fig. 3)
When the meter is on standby, press and hold the RESET key for 2 seconds to reset the resettable total.
DISPLAY CURRENT CORRECTION FACTOR AND
GENERAL TOTAL (See Fig. 4)
Press MENU and RESET together and hold for two seconds.
Value “1.4000” is the correction factor which can be reset;
“1234567” is the general total which cannot be reset.
CHANGE MEASUREMENT UNIT (See Fig. 5)
Press MENU and RESET together and hold for five seconds or until Zone ⑦ on the display shows the
current unit.
Press RESET to choose a different measurement unit.
When desired measurement unit is displayed, press MENU key and hold on for about 3 seconds to lock
in the new measurement unit.
CALIBRATION PROCEDURE
PROCEDURE FOR DIRECTLY ENTERING THE CORRECTION FACTOR
Fig. 4
Fig. 5
Fig. 3